Contact glue XSTONE Pro

€17.00

XSTONE XPRO is a next generation spray adhesive with low hazard to human health due to its low toxicity, as well as providing minimal impact to the environment.

PRO’s advantages are high bond strength, high heat resistance and a fast drying time. XPRO bonds a wide variety of substrates, induding wood, metals, rubber, fabric, most plastics, cardboard, polythene and concrete, as well as decorative laminates. It is ideal for permanent bonds that require good initial bond strength and provides good temperature resistance. If protected from contamination XPRO will have an open time of several hours. Do not use on vinyl or other flexible PVC!

 

 

Category:

Description

Directions for use: Surfaces should be dean, dry and free from grease, oil and dust. Hold the aerosol at approximately 70° to the surface and apply a uniform coat of adhesive, to both substrates, ensuring 80-100% coverage. Spray one surface vertically, the other horizontally and pay particular attention to the edges. Porous substrates may require two applications. The adhesive is ready to bond when it feels dry to the touch and does not transfer. Drying takes approximately 1-2 minutes depending on substrates, temperature and humidity. Bring the surfaces together and apply a uniform pressure over the work piece. Full cure will take 24 hours. To prevent spray nozzle from blocking, at the end of each period of use, tum the can upside down and press nozzle until spray is clear of adhesive. Excess adhesive can be removed with solvent cleaner

Storage: Protect from extremes of temperature in a

controlled environment between 15 and so.Do not stand on a cold concrete floor. Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. Manufactured And Filled In The UK.

Related products